10.46243/jst.2020.v5.i3.pp53-57 registered

Power Failure in the power system is mainly due to the overloading. The possible damage to the area is losing a power. The Arduino Uno based load control system is a device which automatically control overload on generator by controlling power and cut-off supply whenever consumers exceeds the amount of power supplied for peak period. This is achieved by Arduino Uno, which detect overload and simultaneously cut-off the supply for the period of generator overloading. In this paper system can be automated into two stages are monitoring function and controlling function. In Monitoring function it has to record the meter reading at different location in the system, for normal as well as overload condition which is required for system planning. Distribution Supervisory control and Data Acquisition System (DSCADA) performs some of these monitoring function and controlling function about switching operation that is controlling of relay circuit breaker. The function Impacts on Consumer as well as reliability. The research work to be aimed at developing local full scale distribution automation system which can be control from secondary distribution substation to the consumer end. Power distribution automation expected for the broad areas. The project aimed at uninterrupted power supply for loyal energy consumer by implementation of this the problem of interruption off power supply due to energy misusing consumer can be avoided. This system provides the reliable operation at consumer end.