{
    "ok": true,
    "doi": "10.46243/jst.2020.v5.i3.pp172-191",
    "references_in_record": 50,
    "not_read": [],
    "own_doi": [],
    "total": 28,
    "page": 1,
    "pages": 2,
    "per_page": 20,
    "items": [
        {
            "position": 1,
            "key": "ref1",
            "doi": "10.1016/j.proeng.2013.09.161",
            "doi_url": "https://doi.org/10.1016/j.proeng.2013.09.161",
            "unstructured": "Subbarao Chamarthi, N.Sinivasa Reddy, Manoj Kumar Elipey, D.V. Ramana Reddy, “Investigation Analysis of Plasma arc cutting Parameters on the Unevenness surface of Hardox-400 material”, International Conference On DESIGN AND MANUFACTURING, IConDM 2013, Procedia Engineering 64 ( 2013) 854–861",
            "held": false
        },
        {
            "position": 2,
            "key": "ref2",
            "doi": "10.1016/j.procir.2012.07.050",
            "doi_url": "https://doi.org/10.1016/j.procir.2012.07.050",
            "unstructured": "K. Salonitis, S. Vatousianos, “Experimental Investigation of the Plasma Arc Cutting Process”, 45th CIRP Conference on Manufacturing Systems 2012, Procedia CIRP 3 (2012) 287–292",
            "held": false
        },
        {
            "position": 3,
            "key": "ref3",
            "doi": "10.4028/www.scientific.net/amr.576.3",
            "doi_url": "https://doi.org/10.4028/www.scientific.net/amr.576.3",
            "unstructured": "R. Bhuvenesh, M.H. Norizaman, M.S. Abdul Manan, “Surface Roughness and MRR Effect on Manual Plasma Arc Cutting Machining, World Academy of Science”, Engineering and Technology International Journal of Industrial and Manufacturing Engineering, Vol:6, No:2, 2012",
            "held": false
        },
        {
            "position": 4,
            "key": "ref4",
            "doi": "10.1016/j.mspro.2014.07.342",
            "doi_url": "https://doi.org/10.1016/j.mspro.2014.07.342",
            "unstructured": "Milan kumar das, Kaushik kumar, Tapan Barman, Prasanta sahoo, “Optimization of process parameters in plasma arc cutting of EN31 steel based on MRR and Multiple Roughness characteristics using grey relation analysis”, Procedia Materials Science 5 (2014) 1550–1559, International conference on Advances in manufacturing and materials engineering AMME 2014",
            "held": false
        },
        {
            "position": 5,
            "key": "ref5",
            "doi": "10.7753/ijsea0403.1003",
            "doi_url": "https://doi.org/10.7753/ijsea0403.1003",
            "unstructured": "Parthkumar M. Patel and Jaypalsinh Rana “Parametric Analysis of EN8 (AISI 1040) Alloy steel on Plasma Arc Cutting” International Journal of Science and Engineering Applications Volume 4 Issue 3, 2015, ISSN-2319-7560 (Online)",
            "held": false
        },
        {
            "position": 7,
            "key": "ref7",
            "doi": "10.17577/ijertv9is080005",
            "doi_url": "https://doi.org/10.17577/ijertv9is080005",
            "unstructured": "Pallavi H. Agarwal, Ketulkumar R. Patel “Optimizing Plasma Arc Cutting Parameters for Structural Steel using Grey Relational Analysis” International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 8 Issue 01, January-2019",
            "held": false
        },
        {
            "position": 8,
            "key": "ref8",
            "doi": "10.1016/j.jmatprotec.2007.05.061",
            "doi_url": "https://doi.org/10.1016/j.jmatprotec.2007.05.061",
            "unstructured": "R. Bini, B.M. Colosimo, A.E. Kutlu, M. Monno, “Experimental study of the features of the kerf generated by a 200A high tolerance plasma arc cutting system”, journal of materials processing technology 196 (2008) 345–355",
            "held": false
        },
        {
            "position": 10,
            "key": "ref10",
            "doi": "10.1504/ijedpo.2010.034988",
            "doi_url": "https://doi.org/10.1504/ijedpo.2010.034988",
            "unstructured": "J. Kechagias, P. Stavropoulos, S. Maropoulos, K. Salonitis, “On the multi–parameter optimization of CNC plasma-arc cutting process quality indicators using Taguchi Design of Experiments”, Recent Advances in Electrical Engineering",
            "held": false
        },
        {
            "position": 11,
            "key": "ref11",
            "doi": "10.1088/0022-3727/46/22/224011",
            "doi_url": "https://doi.org/10.1088/0022-3727/46/22/224011",
            "unstructured": "T Kavka, A Maslani, M Hrabovsky, P Krenek, T Stehrer, H Pauser, “Experimental Study Of The Effect Of Gas Nature On Plasma Arc Cutting Of Mild Steel”, Journal Of Physics D: Applied Physics, J. Phys. D: Appl. Phys. 46 (2013) 224011 (13pp)",
            "held": false
        },
        {
            "position": 12,
            "key": "ref12",
            "doi": "10.1080/10426914.2013.773015",
            "doi_url": "https://doi.org/10.1080/10426914.2013.773015",
            "unstructured": "Yaha hisman selic, “Investigating the Effects of Cutting Parameters on Materials Cut in CNC Plasma”, Materials and Manufacturing Processes, 28:10, 1053-1060, DOI: 10.1080/10426914.2013.773015",
            "held": false
        },
        {
            "position": 18,
            "key": "ref18",
            "doi": "10.31142/ijtsrd21506",
            "doi_url": "https://doi.org/10.31142/ijtsrd21506",
            "unstructured": "Patel Jitendra Kumar “Multi-Response Parameter Optimization Hardness and Unevenness Effect of Hardox Cutting Plate by High Tolerance Plasma Arc Cutting System” International Journal of Trend in Scientific Research and Development (IJTSRD) Volume: 3 | Issue: 2 | Jan-Feb 2019 Available Online: www.ijtsrd.com e-ISSN: 2456–6470",
            "held": false
        },
        {
            "position": 21,
            "key": "ref21",
            "doi": "10.21090/ijaerd.020577",
            "doi_url": "https://doi.org/10.21090/ijaerd.020577",
            "unstructured": "Mr. Rajnikant C. Bidajwala, Ms.Mili A. Trivedi, Mr.Hiren M. Gajera and Mr. Tejendrasinh S.Raol “Parametric optimization on plasma arc cutting machine for AISI 1018” Scientific Journal of Impact Factor(SJIF): 3.134 e-ISSN(O): 2348-4470 p-ISSN(P): 2348- 6406 Volume 2,Issue 5, May-2015",
            "held": false
        },
        {
            "position": 23,
            "key": "ref23",
            "doi": "10.1016/s0924-0136(01)00583-0",
            "doi_url": "https://doi.org/10.1016/s0924-0136(01)00583-0",
            "unstructured": "L.J. Yang “Plasma surface hardening of ASSAB 760 steel specimens with Taguchi optimisation of the processing parameters” Journal of Materials Processing Technology 113 (2001) 521–526",
            "held": false
        },
        {
            "position": 25,
            "key": "ref25",
            "doi": "10.26488/iej.11.12.1153",
            "doi_url": "https://doi.org/10.26488/iej.11.12.1153",
            "unstructured": "S.Mittal and M.D. Mahajan “Multi-Response Parameter Optimization of CNC Plasma Arc Machining Using Taguchi Methodology” Industrial Engineering Journal ISSN:2581-4915",
            "held": false
        },
        {
            "position": 26,
            "key": "ref26",
            "doi": "10.1016/j.matpr.2020.01.605",
            "doi_url": "https://doi.org/10.1016/j.matpr.2020.01.605",
            "unstructured": "Devaki Nandan Sharma and J. Ram Kumar “Optimization of dross formation rate in plasma arc cutting process by response surface method” https://doi.org/10.1016/j.matpr.2020.01.605 at Science Direct Materials Today: Proceedings Journal homepage: www.elsevier.com/locate/matpr",
            "held": false
        },
        {
            "position": 29,
            "key": "ref29",
            "doi": "10.1016/j.matpr.2017.12.024",
            "doi_url": "https://doi.org/10.1016/j.matpr.2017.12.024",
            "unstructured": "Sovan Bhowmick, Jisnu Basu, Gautam Majumdar, Asish Bandyopadhyay, “Experimental study of plasma arc cutting of AISI 304 stainless steel”, Materials Today: Proceedings 5 (2018) 4541–4550, ICMPC 2017",
            "held": false
        },
        {
            "position": 30,
            "key": "ref30",
            "doi": "10.1016/j.matdes.2005.02.014",
            "doi_url": "https://doi.org/10.1016/j.matdes.2005.02.014",
            "unstructured": "Abdulkadir Gullu, Umut Atici, “Investigation of the effects of plasma arc parameters on the structure variation of AISI 304 and St 52 steels”, Materials and Design 27 (2006) pp. 1157-1162",
            "held": false
        },
        {
            "position": 31,
            "key": "ref31",
            "doi": "10.1504/ijrapidm.2009.028930",
            "doi_url": "https://doi.org/10.1504/ijrapidm.2009.028930",
            "unstructured": "B. Asiabanpour, D. T. Vejandla, C. Novoa, J. Jimenez, R. Fischer, “Optimizing The Quality Of Parts Manufactured By The Automated Plasma Cutting Process Using Response Surface Methodology”, 2016",
            "held": false
        },
        {
            "position": 33,
            "key": "ref33",
            "doi": "10.1007/s00170-014-6744-0",
            "doi_url": "https://doi.org/10.1007/s00170-014-6744-0",
            "unstructured": "R. Adalarasan M. Santhanakumar and M. Rajmohan “Application of Grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steel” Int J Adv Manuf Technol DOI 10.1007/s00170-014-6744-0 Received: 20 February 2014 /Accepted: 18 December 2014 # Springer-Verlag London 2014",
            "held": false
        },
        {
            "position": 34,
            "key": "ref34",
            "doi": "10.1007/s40430-018-0997-8",
            "doi_url": "https://doi.org/10.1007/s40430-018-0997-8",
            "unstructured": "H. Ramakrishnan, R. Balasundaram, N. Ganesh And N. Karthikeyan “Experimental investigation of cut quality characteristics on SS321 using plasma arc cutting” Journal of the Brazilian Society of Mechanical Sciences and Engineering (2018) 40:60",
            "held": false
        }
    ]
}